News
Feng Huang Technology
News Center
Welding Characteristics of Carbon Steel Materials in Welding Material Companies
Under normal conditions, welding does not result in severe microstructural hardening or the formation of quenched structures. Low-carbon steel has a low carbon content and relatively low levels of manganese and silicon; consequently, welded joints made from this steel exhibit excellent ductility and toughness. Its ductility and impact toughness are outstanding, and preheating or post-weld heating is generally not required when welding this material.
View Details
Characteristics of Stainless Steel Welding by Welding Materials Companies
2022-09-22
Welding-induced embrittlement of the weld and heat-affected zone is a process characterized by non-uniform heating and cooling, which leads to microstructural inhomogeneity. In welding materials, the ductile-to-brittle transition temperature of the weld and heat-affected zone is higher than that of the base metal; consequently, the base metal constitutes the weakest link in the joint. Moreover, the heat input during welding significantly influences both the mechanical strength of low-alloy high-strength steel welds and the properties of the heat-affected zone.
2022-10-08
What are the proper welding techniques for aluminum welding wire, according to welding materials companies? Aluminum welding wire is a column-shaped material with relatively low compressive strength and considerable softness, and it is highly sensitive to hydrogen solubility during the melting process. Key factors that significantly affect the performance of aluminum welding wire include surface finish, wire cleanliness, control of wire diameter, as well as wire warping and coiling conditions. So, how should aluminum welding wire be properly welded?
2022-10-12
Could the welding materials company please introduce the various welding methods for stainless steel welding wire? Only sufficient working pressure is applied to the surface of the stainless steel during welding. Due to the plastic deformation caused by this working pressure, the molecules can draw close to one another, resulting in solid-state fusion. This method includes cold arc welding, explosive welding, and others (primarily used for clad steel plates).
Introduction to the Applications and Usage Scenarios of Bauxite Clinker by Bauxite Suppliers
2022-10-24
Bauxite, whose main component is various forms of alumina, is a hydrous aluminum oxide that may contain substantial impurities; it is a clay-like mineral. It appears white or grayish-white, brownish-yellow, or light red due to its high iron content. Its density is 3.45 g/cm³, its hardness ranges from 1 to 3, it is opaque and brittle, and it is extremely difficult to melt. It is insoluble in water but soluble in standard solutions of sulfuric acid and sodium hydroxide. Bauxite is used in aluminum smelting and in the manufacture of refractory materials.
Alumina Bauxite Supplier: Introduction to Bauxite Composition and Applications
2022-11-01
Alumina Bauxite Supplier Introduction: Bauxite, also known as Chinese bauxite or simply bauxite, is primarily composed of various alumina oxides. It is a hydrous aluminum oxide product that may contain substantial impurities and is classified as an earth-like mineral. Its color ranges from white or grayish-white to brownish-yellow or pale red, depending on its iron content. Bauxite has a density of 3.45 g/cm³, a hardness of 1–3, is opaque, and is brittle. It is extremely difficult to melt. It is insoluble in water but soluble in standard solutions of sulfuric acid and sodium hydroxide. Bauxite is mainly used in the smelting of aluminum and in the production of refractory materials.
Alumina bauxite supply informs you: What are the main factors that influence bauxite sintering?
2022-11-11
Alumina bauxite suppliers explain the primary factors influencing bauxite sintering. There are two main factors: secondary mullite and the liquid phase. The former is determined by the Al2O3/SiO2 ratio and acts as a barrier to sintering, while the latter serves as a sintering catalyst.
Alumina bauxite supplier: What are the specific applications of alumina bauxite?
2022-11-22
What are the specific applications of bauxite, as explained by a bauxite supplier? Bauxite is produced by high-temperature calcination of ores with high aluminum content and low iron content; it is also referred to as alumina ore or aluminous earth. Its main component is alumina, with trace amounts of hydrated alumina as impurities, making it a clay-like mineral.
Alumina Bauxite Supply Explains: What Is Alumina Bauxite Aggregate?
2022-12-01
Alumina Bauxite Supply explains what alumina bauxite aggregate is: Alumina bauxite aggregate is a refractory granular material that serves as the skeletal component in the particle-size distribution of refractories. It is produced by calcining and crushing selected raw bauxite ore or through artificial synthesis, resulting in granular material with a particle size greater than 0.088 mm.
Composition and Functions of Solder Flux
2022-12-13
Solder Paste Composition: Solder paste is primarily composed of alloy solder powder and flux. The flux, which is a two-component organic solvent, plays a crucial role in ensuring uniform mixing throughout the entire blending process and significantly affects the service life of the solder paste. Moreover, the composition of the flux has a substantial impact on the solder paste’s spreadability, lubricity, slump, viscosity changes, cleanability, solder ball spatter, and storage life.
Zhengzhou Phoenix New Materials Technology Co., Ltd.
Address: Duanhe Industrial Park, Xiaoguan Town, Gongyi City, Henan Province, China
Mobile phone:18503899117
Telephone:0371-67316888
Email:phx2@fenghuanghj.com
Copyright © Zhengzhou Fenghuang New Materials Technology Co., Ltd.